Siser Easy Weed - P.S Film HTV SHEETS

Siser

$3.20 
SKU: A0001-200

Siser Easy Weed P.S Film is a thin finish, soft feel heat transfer vinyl available in a wide range of sheet and roll sizes. Vibrant colours, easiness of use, one step application, hot or cold peel, great colour fastness and washing resistance makes this HTV one of the most favourite products available in the market.

Its composition allows the overlaying of P.S. Film directly on P.S. Film, or of Siser Stripflock on P.S. Film, so offering an endless blend of colours and effects.

The product is REACH compliant
The product is certified Öko-Tex® Standard 100 Class I
The product is certified VeganOK

          

Tips and Info - How to Guide

Tips and Info - Important HTV Information

Tips and Info - Crafting Ideas

EasyWeed Applies To:

Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 4


Settings may vary based on blade condition and age of machine. Always perform a test

Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 25-50 cm/s

Graphtec:   Blade: 45°   Force: 8-9   Tool: CB09+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 80-85   Speed: 300 mm/s   *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

cut prior to cutting designs.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Click here for a printable version of all HTV application instructions