Siser Easy Weed Colours ROLLS
Plotter cut flex material, with a soft and very thin finish, available in a wide range of colours.
Its peculiar composition allows the overlaying of P.S. Film directly on P.S. Film, or of Stripflock on P.S. Film, so offering an endless blend of colours and effects.
Vibrant colours, easiness of use, one-step application, hot or cold peeling, reliability in colour fastness and washing resistance are the main features making the P.S. line one of the most favourite products currently available on the market.
The product is REACH compliant
The product is certified Öko-Tex® Standard 100 Class I
The product is certified VeganOK
Tips and Info - Important HTV Information
Tips and Info - Crafting Ideas
EasyWeed Applies To:

![]() |
Cricut: Blade: Standard Setting: Iron-on |
![]() |
Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 |
![]() |
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 4 |
Settings may vary based on blade condition and age of machine. Always perform a test
![]() |
Roland GX/GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
![]() |
Graphtec: Blade: 45° Force: 8-9 Tool: CB09+0 Speed: 30 cm/s |
![]() |
MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
![]() |
Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
cut prior to cutting designs.
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |
Click here for a printable version of all HTV application instructions